By establishing and maintaining a healthy balance in the pond/ aquarium, and by removing soluble and particulate organic waste matter, the water will obtain clarity otherwise not available. Any small or microscopic debris in the pond or aquarium will add to turbidity, clouding of the pond/ aquarium and detracting from the overall appearance. With Tangsons Products at work, this is removed by the bacterial action.
The best application is to dissolve into water for activation first and add amount of product indicated on the container for your size pond. It can be put in one spot or spread around the edge of the pond by hand or metered dispenser. The end result will be full coverage of the entire pond, but it will become distributed more quickly in a larger pond if applied to different areas.
Simply add the additional bacteria amount when you realize the mistake. If you didn’t add enough in the initial purge dosage the bacteria will begin working, but will take much longer to show the desired effects. It works a lot better if you use as directed.
Yes, it can be applied by a sprayer. A low pressure garden sprayer will not harm the bacteria and if it is easier to apply over a large area like this, the user can do that. However, it should be a coarse spray and not a fine spray that would produce a lot of aerosols.
Products should be protected from extreme heat and direct sunlight. It can withstand heat up to 105ºF before starting to die. A cellar, garage or shed (but not in an attic in the shed) should provide the necessary protection during summer months. The ideal storage temperatures are between 40-105ºF.
All of our dry biological products , and the dry bio-products with added enzyme and other support material have an extended shelf life well beyond our two year stated claim. The dry formulations consist of multiple strains of spore forming microorganisms and these microorganisms can stay in the spore form (dormant state) for an indefinite period of time when properly stored.
The method of microbial activation is twofold: a) the addition of water; b) the presence of waste organic matter. Both of these factors are required to activate the microbes and get their biological oxidation process going.
Probably. Every application is different. If you have particular concerns about your client, please get in touch and we’ll try our best to help you.